Trusted since 2001 · Same-day response for emergencies · Call 951-458-6466
In Business
Rated
Contractors
Liability Coverage
Satisfaction Guaranteed
Who They're For and What They Solve
Tile and slate roofing covers the installation, repair, and restoration of roofs built from clay tile, concrete tile, or natural slate. These are layered, individually fastened units resting on battens or decking, with a waterproof underlayment beneath doing the real sealing work. The tile sheds weather; the membrane keeps water out.
Owners of Spanish, Mediterranean, Colonial, and heritage-style properties need this work most. Triggers include cracked or slipped units after high wind, ceiling stains with no visible hole, moss growth lifting slate edges, and roofs reaching the 25 to 40 year mark where the original underlayment has quietly reached the end of its service life.
Left alone, a single broken tile lets water reach the membrane, then the battens, then the deck. Rot spreads sideways and silently for months. Before committing to any work, a roof inspection service confirms whether you need four tiles replaced or the whole system relaid, which usually saves thousands.
Our Services
Our tile and slate roofing work spans four distinct approaches, from single-unit repairs through full system installation.
We install complete clay and concrete tile systems over batten or direct-deck assemblies, including new underlayment, flashing, and ridge work. This is the right approach when the existing roof has failed structurally or you are building new. Result: a sealed system rated for 50 or more years.
Hand-cut natural slate laid with copper nails or stainless hooks, matched to the existing course and exposure. Restoration replaces only the delaminated slates while preserving originals. This suits heritage properties where character matters. Result: a roof that looks original and performs like new.
Targeted replacement of cracked, slipped, or spalling units, including flashing repair at valleys, chimneys, and penetrations. Best when the underlayment still has life left. We source matching profiles, including discontinued ones. Result: the leak stops without the cost of a full replacement.
We carefully lift and stack sound tiles, strip the failed membrane, install new underlayment and battens, then reinstall the original tiles. This is the answer when the tile is fine but the waterproofing is spent. Result: decades of added life at roughly half the price of new tile.
Not sure which approach your situation needs? We assess first and recommend only what’s necessary, no upsells.
Why Homeowners Choose Mr. Local Services
We have completed more than 2,400 tile and slate roofs since 2001. Our crews are trained specifically in slate craft and tile fastening, not shingle work adapted on the fly.
You receive a line-item quote covering materials, labor, and disposal. The number is fixed. Nothing gets added without your written approval first, ever.
Most tile damage happens under a careless boot. We stage foam-pad walk boards across every slope so crews never load weight directly onto your tiles.
Our workmanship is guaranteed in writing for ten years, and the coverage transfers to the next owner, which strengthens your position at resale.
How It Works
Call 951-458-6466 and we book your inspection within 48 hours, usually sooner when active water intrusion is involved.
We walk the roof on protective boards, photograph every failure point, check underlayment condition, and identify the tile profile for matching.
You get a fixed quote within 24 hours listing repair, relay, or replacement options side by side so you can compare real costs.
We complete the work, clear all debris magnetically, walk the finished roof with you, and issue your written ten-year warranty.
Pricing
Pricing depends on four things: the material, the roof pitch and access difficulty, how much underlayment and batten work is needed, and whether your tile profile is still in production.
Typical ranges we quote: individual tile or slate repairs run $450 to $1,400. Lift-and-relay underlayment replacement runs $9 to $16 per square foot. Full clay or concrete tile installation runs $14 to $24 per square foot, with natural slate reaching $30 or more.
Every quote is itemized and fixed. Disposal, flashing, and cleanup are included in the number you see.
Yes. When the underlayment is still sound, targeted replacement is the correct fix. We source matching profiles, including discontinued ones.
Clay and concrete tile lasts 50 or more years, natural slate often exceeds 100. The underlayment beneath typically needs renewal at 25 to 40 years.
The tile sheds water, but the underlayment seals it. Failed membrane, flashing, or valleys cause leaks with no visible tile damage.
Yes. We carry $2 million general liability and workers' compensation, plus a state roofing license. Certificates come with every quote.
Repairs finish in one day. Lift-and-relay takes three to six days. Full installations run one to two weeks depending on roof size.
Our roof repair service shingle, flat, and metal repairs when the issue sits outside tile and slate work.
Call 951-458-6466 and we schedule your inspection within 48 hours, then send a fixed written quote inside 24 hours.
Every week a cracked tile sits unrepaired, water moves further into the deck below. Book your inspection now and get a fixed written quote within 24 hours.
