Trusted since 2001 · Same-day response for emergencies · Call 951-458-6466
In Business
Rated
Contractors
Liability Coverage
Satisfaction Guaranteed
Who They're For and What They Solve
Rough carpentry is the structural framing work that forms a building’s skeleton. It covers wall studs and plates, floor joists and beams, roof rafters and trusses, headers over openings, and the blocking that ties everything together. This is the load-bearing wood structure hidden behind drywall once the project is finished.
You need rough carpentry whenever you are building an addition, converting a garage, removing a load-bearing wall, replacing a rotted subfloor, or starting new construction. Permitted projects almost always require it, because framing carries the structural load and must satisfy the inspector before any other trade proceeds.
Rough carpentry solves the structural problems that cause bouncing floors, sagging rooflines, cracked drywall, and doors that will not close. Skip it or do it wrong and every trade that follows inherits the error cabinets sit crooked, tile cracks, and inspection fails, stalling the entire project schedule.
Is It Time?
Most people notice the symptom long before they know the cause.
Our Services
Our rough carpentry work spans every structural framing element from the subfloor to the ridge.
We snap layout lines, set bottom and top plates, and frame studs at correct spacing with properly sized headers over every door and window. This is the right approach for additions, new walls, and load-bearing wall modifications. You get straight, plumb walls ready for sheathing and every trade behind us.
We size and set joists, beams, rim boards, and blocking, then install subfloor decking glued and fastened to spec. This applies to new builds, additions, and floors that flex or have rotted out. The result is a flat, solid, silent floor that carries load without movement.
We frame rafters, set trusses, install ridge and ceiling joists, and build out overhangs and bearing points. This is the approach for new roof structures, dormers, vaulted ceilings, and additions tying into an existing roof. You get a correct load path and a roofline that stays true.
We sister damaged joists, replace failed headers, cut out rot, and reframe sections that failed inspection or were built wrong. This fits older properties, storm damage, and stalled projects we take over mid-build. The frame gets brought back to code without a full teardown.
Not sure which approach your situation needs? We assess first and recommend only what’s necessary, no upsells.
Why Homeowners Choose Mr. Local Services
Every wall is checked against layout lines and every floor system verified before sheathing goes down. We measure tolerance at each phase rather than discovering problems after drywall.
We frame to code and to your engineered plans. If an inspector flags our structural work, we return and correct it at no charge to you.
Cut waste gets removed daily, not piled until the end. Before we leave, we walk the finished frame with whichever trade comes next.
The same crew works your project from layout to final nail. No subbed-out labor, full general liability, and workers' compensation coverage throughout.
How It Works
Call 951-458-6466 and we schedule a walkthrough, usually within 48 hours, to review plans, measure spans, and check existing conditions.
You receive a written scope with lumber, hardware, and labor broken out separately, plus a firm start date tied to your permit schedule.
We snap layout lines, then frame walls, floors, and roof systems in sequence, checking plumb, level, and square continuously as the structure goes up.
We verify tolerances, confirm the frame is inspection-ready, clear the site, and walk the completed structure with your next trade before leaving.
Pricing
We give real numbers upfront instead of hiding pricing behind a contact form. Framing cost comes down to a handful of measurable factors, and we break every one of them out in writing before work starts.
What affects your price: total square footage and framing complexity, lumber grade and current material costs, span lengths requiring engineered beams or LVLs, site access and whether demolition or shoring is needed, and roof pitch or structural repair scope.
Typical ranges: most residential framing runs $8–$18 per square foot for standard wall, floor, and roof work. Targeted structural repairs such as joist sistering or header replacement generally fall between $1,200 and $6,500 depending on access and span.
Your quote is itemized and fixed. No change orders unless you change the scope.
Rough carpentry builds the structure, while finish carpentry work covers the visible trim, doors, and molding installed afterward — two separate phases you can book together or apart.
Yes. On permitted projects, framing must be inspected before insulation or drywall. We frame to code and correct any flagged structural work at no charge.
A room addition frame typically takes 4 to 10 working days. Structural repairs often finish in 1 to 3 days depending on access and scope.
Yes. We regularly inspect partially framed or failed work, document what needs correction, and reframe only the sections that actually require it.
Yes. We install properly sized headers and beams to transfer load safely, following engineered plans when the span requires them.
Yes. Lumber, hardware, and fasteners are itemized separately in your quote so you see exactly what you are paying for.
Call 951-458-6466 and we schedule a walkthrough, usually within 48 hours, then send a written itemized quote.
Every trade after us depends on a frame that is plumb, level, and square. Get an itemized quote with a firm start date before your permit clock runs down.
