Trusted since 2001 · Same-day response for emergencies · Call 951-458-6466
In Business
Rated
Contractors
Liability Coverage
Satisfaction Guaranteed
Who They're For and What They Solve
Microwave repair is the diagnosis and correction of faults in the components that generate, control, and contain microwave energy. That includes the magnetron, high-voltage diode and capacitor, door interlock switches, control board, thermal fuse, and turntable motor. Technicians discharge stored voltage first, then isolate the failed part.
You need it when a microwave runs but produces no heat, sparks inside the cavity, trips your breaker, shuts off mid-cycle, or stops responding at the keypad. Door latch failures and turntables that stop rotating also qualify. These faults appear across countertop, over-the-range, built-in, and drawer models alike.
Left alone, a failing microwave stops being just an inconvenience. Arcing burns through the waveguide cover and damages the cavity wall. A bad door interlock lets the unit operate with a compromised seal. A shorted capacitor can take out the control board, turning a single-part fix into a full replacement.
Is It Time?
Most people wait too long because the unit still powers on. These are the symptoms worth acting on.
Our Services
We service every microwave configuration, from freestanding units to cabinet-integrated drawers, and we work at the component level rather than swapping whole assemblies.
These units combine microwave function with range venting, so failures often involve the exhaust fan, grease filter housing, or vent motor alongside the heating system. Mounting brackets and cabinet clearance make access harder, which is why we bring the right hardware to every call.
The most common residential type, and usually the fastest to diagnose. We service magnetrons, door switches, control boards, turntable motors, and thermal fuses. Because these units are portable, bench-level testing is straightforward and most repairs finish in one visit.
Cabinet-integrated and under-counter drawer models require careful removal to avoid damaging surrounding cabinetry and trim kits. Drawer units add a motorized slide mechanism and separate control assembly. We handle extraction, repair, and reinstallation without leaving marks on your millwork.
The heating system itself magnetron, high-voltage transformer, diode, and capacitor. This work demands proper capacitor discharge before anything is touched. Our technicians are trained and certified for it, and we source manufacturer-authorized replacement parts rather than generic substitutes.
Not sure which approach your situation needs? We assess first and recommend only what’s necessary, no upsells.
Why Homeowners Choose Mr. Local Services
Most microwave calls are scheduled within 24 hours. Your kitchen does not sit idle for a week waiting on a service window nobody confirms.
You approve a written price after diagnosis and before a single tool comes out. No hourly meter running, no invoice surprises when the technician finishes.
Every completed repair carries a written 90-day warranty covering both the replacement part and the work itself. If the same fault returns, we come back at no charge.
When a repair costs more than the unit is worth, we tell you to replace it. Declining work we could have billed is why customers call us back for the next appliance.
How It Works
Call 951-458-6466. We ask what the unit does, note the brand and mounting type, and book a same-day or next-day window.
The technician discharges stored high voltage, tests the magnetron, diode, capacitor, and interlocks, then identifies the exact failed component usually within 30 minutes.
You get a written price covering parts and labor. Nothing proceeds until you say yes, and you are free to decline.
We install the part, run a full heating test, confirm the door seal, clean the work area, and hand you the written 90-day warranty.
Pricing
We publish real numbers because dodging the question wastes your time and ours. Final price depends on four things.
What drives the cost: the failed component, your microwave type, parts availability, and mounting complexity. Over-the-range and built-in units carry higher labor than countertop models because removal and reinstallation take longer.
Typical ranges: door switch or latch replacement runs $120–$190. Turntable motor or coupler replacement runs $130–$200. Control board replacement runs $190–$320. Magnetron replacement runs $220–$380 depending on brand and access.
The replacement threshold: when a quoted repair exceeds roughly half the cost of a comparable new unit, we recommend replacing instead. You get that recommendation before you owe anything.
Yes. Arcing can burn through the waveguide cover and ignite residue inside the cavity. Stop using it and schedule repair immediately.
Most repairs finish in a single visit, typically 45 to 90 minutes. Built-in and drawer units take longer because of removal and reinstallation.
We quote a flat rate covering diagnosis, parts, and labor together. You approve that price before any work begins, with no separate hidden fee.
If the repair costs less than about half a comparable new unit, repair wins. We give you that recommendation honestly, even when it costs us the job.
All major residential and light commercial microwave brands, across countertop, over-the-range, built-in, and drawer configurations.
We do. Units in break rooms and small food operations run far heavier cycles than home microwaves, so our commercial appliance services scheduling, response times, and maintenance plans built for that workload.
Call 951-458-6466, describe the symptom, and we will schedule a same-day or next-day appointment window.
Most microwave faults are one part and one visit. Get a flat-rate quote today, backed by our written 90-day parts and labor warranty.
