Trusted since 2001 · Same-day response for emergencies · Call 951-458-6466
In Business
Rated
Contractors
Liability Coverage
Satisfaction Guaranteed
Who They're For and What They Solve
Commercial and industrial fencing is a perimeter system engineered for business and industrial property rather than residential yards. It uses heavier pipe, deeper concrete footings, tighter post spacing, and hardware rated for constant cycling. Height, mesh gauge, and gate specification are selected to match security, code, and insurance requirements.
Facility managers, developers, plant supervisors, and general contractors need this service. Demand comes from new construction handover, failed insurance inspections, theft or break-in losses, code citations, forklift and truck impact damage, or expansion of outdoor storage and equipment staging areas.
The system controls who enters your property and protects inventory, machinery, vehicles, and personnel. An unsecured or failing perimeter creates liability exposure, invites cargo and copper theft, and can void coverage terms. Sagging lines and broken gates also stall inspections and delay occupancy approvals.
Our Services
Our commercial and industrial fencing scope spans perimeter systems, security barriers, automated access, and temporary site enclosures.
We install 6 to 12 foot chain-link using 9-gauge or 6-gauge mesh on schedule-40 framework. This is the right approach for large yards, storage lots, and utility sites where linear footage is high. You get maximum secured perimeter per dollar with barbed or razor topping available.
Welded steel panels and ornamental pickets deliver anti-climb resistance with a finished appearance. This suits office campuses, retail centers, and public-facing facilities that need security without a utilitarian look. Powder-coated finishes resist corrosion and hold their appearance for decades. Our commercial chain-link fencing page details material grades if you are weighing chain-link against steel panel on cost.
We install slide, swing, and cantilever gates with UL 325 compliant operators, loop detectors, keypads, and card readers. This is essential where truck traffic, delivery windows, or employee credentialing are involved. The result is controlled access with an auditable entry record.
Temporary panel and driven-post enclosures secure active job sites, staging areas, and equipment yards. This is the right call during phased builds or seasonal storage. You get code-compliant enclosure now with clean removal or conversion to permanent fence later.
Not sure which approach your situation needs? We assess first and recommend only what’s necessary, no upsells.
Why Homeowners Choose Mr. Local Services
Every bid states per-foot cost, gate pricing, and footing depth in writing. We do not perform additional work or bill extra without your written approval first.
We use ASTM F1083 galvanized pipe, 30 to 42 inch concrete footings, and UL 325 compliant gate operators. Residential-grade posts never go on an industrial site.
Your survey is scheduled within two business days. Written bid follows within three. Emergency breach and impact repairs get a 24-hour response.
Posts, footings, welds, and gate hardware are covered for five years. Carrying $2M general liability and full workers' compensation on every crew.
How It Works
Call 951-458-6466. We schedule a walk within 48 hours to measure grade, soil, access points, and traffic flow.
You receive material gauge, post schedule, footing depth, gate details, and firm per-foot pricing within three business days.
We pull required permits, then install in phases so loading docks, truck lanes, and employee entrances stay open throughout.
We test every gate cycle and latch with you on site, then register your five-year workmanship warranty before we leave.
Pricing
Commercial and industrial fencing typically runs $28 to $65 per linear foot installed. Heavy-gauge chain-link sits at the lower end. Ornamental steel and welded panel land higher.
Four factors move the number: mesh gauge and fence height, post schedule and footing depth, soil and grade conditions, and gate count with automation. Automated gate assemblies generally add $4,500 to $18,000 each depending on span and operator class.
Every quote includes material, footings, labor, permit coordination, and the five-year workmanship warranty. Most facility projects between 500 and 2,000 feet fall in the $18,000 to $85,000 range.
Commercial chain-link uses 9-gauge mesh minimum, often 6-gauge for industrial sites. Residential 11-gauge fails under impact and constant load.
Most 500 to 2,000 foot projects run 5 to 12 working days after permits clear. Automated gate commissioning adds two to three days.
Yes. We pull required fencing and gate permits and coordinate inspections as part of the quoted scope.
All gate operators we install meet UL 325 safety requirements with proper sensors and reversing devices. Our commercial gate services page covers operator classes and access control options in detail.
Yes. We repair impact damage, sagging lines, and failed gates on existing systems. Call 951-458-6466 for a 24-hour emergency response.
We install welded panel, mini-mesh, and topped systems for high-risk perimeters. Our security fencing options page breaks down anti-climb ratings so you can match spec to your risk level.
Yes. We handle multi-site portfolios with consolidated pricing, unified specification, and a single point of contact.
Written specification, firm per-foot pricing, and a five-year workmanship warranty. Site surveys are booking 48 hours out.
